Filter
Top Products
Page 14SKU 91995 For technical questions, please call 1-800-444-3353.
9. Use the Wrench (109) to unscrew and remove the Spindle Bolt (58).
NOTE: The Spindle Bolt unscrews in a clockwise direction. Then, remove
the Outer Flange (57). (See Figure I.)
11. Wearing heavy duty work gloves to avoid accidental cuts, remove the old Saw
Blade (56). (See Figure J.)
SAW BLADE
(56)
10. Release pressure on the Spindle Lock (84). (See Figure H.)
12. Install the new Saw Blade (56), making sure the teeth of the Saw Blade are
pointing downward. (See Figure D.)
13. Reassemble the Outer Flange (57), and Spindle Bolt (58) rmly.
(See Figure I.)
14. Swing the Large Cover (47) and Safety Cover (53) back in place, making sure
the Safety Cover covers the Saw Blade (56). (See Figure G.)
15. Reinstall the Bolt (50), and retighten the Screw (48). (See Figure G.)
16. Make sure the Safety Cover (53) returns to its original position prior to operating
the Miter Saw.
17. CAUTION! Make sure to pull out on the Cross Pin (28). Turn the Cross
Pin 90 degrees. Then, insert the Cross Pin into the shallow slot in its
unlocked position. NEVER use the Cross Pin in any cutting operation.
(See Figure E.)
SPINDLE BOLT (58)
OUTER FLANGE (57)
CLOCKWISE
TO LOOSEN
COUNTERCLOCKWISE
TO TIGHTEN
FIGURE I
FIGURE J