Filter
Top Products
7
5
6
7
8
The NexStar will automaticall
y
p
ick an ali
g
nment star and
slew the telesco
p
e close to that star. Once there, the dis
p
la
y
will ask you to use the arrow buttons to aim the findersco
p
e
at the star. If the star is not visible (perhaps behind a tree),
press UNDO to select a new star. Next, center the star in
the eyepiece and press ALIGN. Repeat these steps for the
second star alignment. When complete, the display will
read "Alignment Successful".
Alignment Star
Finderscope
Press the TOUR button on the hand control. The hand control
will display a list of celestial objects that are currentl
y
visible.
Press INFO to read information about the ob
j
ect dis
p
la
y
ed.
Press the DOWN scroll ke
y
to dis
p
la
y
the next ob
j
ect. Press
ENTER to slew to (go to) the displayed object.
Ali
g
nment Sta
r
Once powered on, the NexStar will display
NexStar GPS
NexStar GPSNexStar GPS
NexStar GPS, press ENTER to select GPS
alignment. The NexStar will automatically find its
North and Level position and retrieve information
from the GPS satellites.
Plug-in the supplied 12v AC adapter into the outlet
on the bottom portion of the drive base. Before
powering the NexStar, point the tube down towards
the ground and lock both the altitude and azimuth
clutches. Power the NexStar by flipping the
"On/Off" switch to the "On" position.
12v DC
Powe
r
On/Off
Switch
Tour
Button
Up and Down
Scroll Buttons