®
3
9
Figure #5
ALMOND
BEZEL
BEZEL
TABS
BEZEL
ALIGNMENT
PINANDHOLE
Figure #3
ALMOND
BEZEL
RUBBERKEY
PAD
LOCATING
PINS(4)
W-85 Wall Control Bezel replacement: -
CONTINUED
Step 17c.Reinstalltherubberkeypadontothe
four(4)locatingpinslocatedonthealmondbezel
asshowninFigure#3and#4.
Step 17d. To attach the bezel back on to the front
oftheswitchyouwillneedtoalignthefour(4)tabs
on the bezel with the front of the wall control and
by gently pressing on both top and button of the
bezel at the same time, snap the bezel back on to
thefrontoftheswitchasshowningure#5.
Step 17e. Check your work by pressing on the
light, fan, reverse and power buttons, making sure
that the buttons do not stick and that each switch
functions properly.
RUBBERKEY
PAD
ALMOND
BEZEL
Figure #4
LOCATING
PINS
(4)