Filter
Top Products
4
CAUTION: To reduce the risk
of personal injury, use only the
mounting hardware provided
to install the crossbar mount-
CEILING
WIRING
CROSSBAR
MOUNTING
BRACKET
FLAT
WASHER
GREEN
GROUND
WIRE
CEILING
FAN
OUTLET
BOX
RIDGE
SIDE
DOWN
WASHERS
SCREWS
CROSSBAR MOUNT-
ING
BRACKET INSTALLED
HATCH
OUTLET BOX
MOUNTING
HARDWARE
Note: On sloped ceilings, align the
canopy opening towards the top or
room peak.
Route the wires from the ceiling outlet box through
the crossbar mounting bracket center hole. Attach the
bracket, with ground wire and ridges down, to the ceiling
fixture outlet box with the mounting hardware included with
the outlet box.
Tighten the screws firmly by hand only, being careful not to
bend the bracket by over tightening.
Attach the canopy to the crossbar mount-
ing bracket with three of the 8-32 x 2
1
/4″ long
canopy screws and canopy lock washers.
Tighten the screw firmly by hand only.
COVER
GLASS SHADE
HALOGEN BULB
100 WATT
(4)
CROSSBAR MOUNTIING BRACKET INSTALLATION