Filter
Top Products
20. Attach limit chain and circular shield as
shown in (Figure 17).
21. Attach Slow Moving Vehicle (SMV) bracket to
three point lift hitch as shown. (Figure 18)
22. While leaving slack in hydraulic hose, clamp
it to the three point lift hitch. (Figure 8)
23. Slide overunning clutch end of driveline onto
input shaft of hay mower. Insure that clutch end
snaps into place.
24. The hook end of the safety chain will be
attached to the tractor after the hay mower is mount-
ed to the tractor three point hitch. The free end of
the chain is then inserted through the bracket on the
hitch frame of the hay mower. The loose end may
then be reinserted back through the bracket to cap-
ture the chain.(Figure 17)
10 -30 mm
30 - 10.5 - 3 mm
Figure 16 Top Support
12 - 40 mm
12 -40 mm
Figure 17 Retaining Spring
Circular
Shield
Safety
Chain
Figure 18
Slow Moving Vehicle Sign (SMV) Assembly
8 - 20 mm
6 - 20 mm
10 - 30 mm
Limit
Chain
55