Filter
Top Products
28
Advanced Settings Screen
kW
kW
FLASHING
50/60 Hz
FLASHING
Hz
PHASE
VOLTS
SOFTWARE
Version Displayed
VOLTS
FLASHING
SINGLE
or
THREE
FLASHING
E-Governor
Check
Stepper Motor
will sweep through throttle
range for dealer
visual verication
or
or
or
or
or
or
or
or
or
or
Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items and/or to
change items, follow the instructions listed below.
NOTICE Advanced settings are critical to the operation of the unit. Careful consideration should be taken when working
in the Advanced Settings menu. Exercise caution when selecting and verifying parameters for the generator and region
where the generator is being operated. Confirm all settings before operating the generator for the first time.
For advanced menu items, press and hold the left arrow, right arrow, and escape key for 3 seconds. Follow the
prompts as outlined below.
NOTICE In the Advanced Setting menu, a three button access code (left arrow, right arrow, and escape key must
be pressed once to enter the menu and again to change any setting. After each confirmation of a setting, the selection will
display solid for 2 seconds before moving to the next program item.
Not applicable
with these
models
NOT
for
REPRODUCTION