Filter
Top Products
F/N 71537 Oct 07 © 2007 ICS, Blount Inc.
TITLE613GC SERVICE MANUAL
51
16. FLYWHEEL
16 This section covers the removal,
inspection, and installation
of the flywheel. Removal of
the starter and spark plug is
required.Refertosections6
and 8 if necessary.
16.1 Insert piston stop.
16.2 Remove flywheel nut, wave washer,
and plain washer.
16.3 Screw on flywheel removal tool finger
tight. Unscrew tool 1 ½ turns leaving
approximately 1/8 inch (5 mm) space
between tool and flywheel.