Blount 613GC Chainsaw User Manual


  Open as PDF
of 84
 
© 2007 ICS, Blount Inc. F/N 71537 Oct 07
TITLE 613GC SERVICE MANUAL
46
13. CYLINDER & PISTON
13.27 Install carburetor base.
A Slip pulse tube into carburetor base.
B Slip rear manifold into carburetor
base.
C Make sure rear manifold lip is flat.
13.28 Install carburetor base screws.
A Use blue Loctite
®
on 3 screws without
ground wire.
B Make sure to include stop switch
wire.
C Torqueto35in-lbs.(4Nm).
 previous next