Blount 613GC Chainsaw User Manual


  Open as PDF
of 84
 
© 2007 ICS, Blount Inc. F/N 71537 Oct 07
TITLE 613GC SERVICE MANUAL
2
SHOP MANUAL USE
Shop Manual Use
This manual contains all the technical information necessary for carrying out repairs on the
613GC cut-off saw. For safe, efficient work, it is of prime importance that the values indicated
be adhered to. Routine periodic maintenance is covered in the operator’s manual included with
each cut-off saw.
General Shop Rules
• Alwaysusetherighttoolsforthejob,otherwisecomponentsmaybedamaged.
• Useaplasticdeadblowmallettoseparatepartsattachedsolidlytoeachother.
• Markmatingpartsasareassemblyreference.
• Keepcomponentpartstogetherasagroup.Assemblescrewsandnutsintoappropriate
subgroups.
• Whenreassembling,cleanallpartscarefully,lubricatemovingpartsandreplacealloilseals,
orings, gaskets, washers and self-locking nuts.
• For best results, use only original ICS
®
replacement parts.
General Recommendations
• Someproceduresinthismanualrequiretheuseofspecialtools.AcompletetoolkitforICS
®
cut-off saws is available from ICS
®
.
• DetailedcarburetormaintenanceandoverhaulinformationisavailableinWalbro’s
Diaphragm Carburetor Service Manual. Walbro can be contacted at http:\\www.walbro.com
or by calling 1.989.872.2131.
 previous next