Blount 613GC Chainsaw User Manual


  Open as PDF
of 84
 
© 2007 ICS, Blount Inc. F/N 71537 Oct 07
TITLE 613GC SERVICE MANUAL
36
12. CARBURETOR
12 This section covers the
removal and installation of the
carburetor. Removal of the air
intake components and cylinder
coverisrequired.Pleaserefer
to sections 5 and 10 or 11 if
necessary. Carburetor tuning is
covered in section 23.
12.1 Remove throttle linkage.
A Push trigger end out of rear handle.
B Pivot linkage around.
C Remove carburetor end of linkage
from throttle rod tab on carburetor.
NOTE: Allsawsareequippedwith
carburetor model # WJ-85A.
12.2 Remove choke lever split pin.
12.3 Remove choke lever.
12.4 Removeadjustmentscrewboot.
 previous next