Filter
Top Products
© 2007 ICS, Blount Inc. F/N 71537 Oct 07
TITLE 613GC SERVICE MANUAL
38
13. CYLINDER & PISTON
13 This section covers the
disassembly, inspection and
assembly of the cylinder, piston
and related components.
Removal of several component
groupsisrequired.Referto
sections 5, 6, 10, and 12 if
necessary.
13.1 Remove carburetor base screws.
A Remove carburetor base from rear
manifold.
B Remove carburetor base from pulse
tube.
13.2 Remove pulse tube and protective
spring from cylinder base.
NOTE: When replacing the 613GC cylinder
and piston it is necessary to tune the
carburetor prior to returning the saw to
service (see section 23).