Blount 613GC Chainsaw User Manual


  Open as PDF
of 84
 
F/N 71537 Oct 07 © 2007 ICS, Blount Inc.
TITLE613GC SERVICE MANUAL
33
10. CYLINDER COVER
10.13 Install cylinder cover.
A Pull spark plug lead into slot in
cylinder cover.
B Align throttle linkage with cylinder
cover and crankcase.
C Push the cylinder cover down on the
crankcase, guide intake manifold into
cylinder cover.
D Install the cylinder cover screws. Use
blue Loctite
®
.Torqueto35in-lbs.
(4.0 Nm).
E Install fuel tank breather and clamp.
10.14 Install air filter mount.
A Guide carburetor compensating tube
through air filter mount. Make sure
manifold sits flat over lip on cylinder
cover.
B Install air filter mount screws (3) using
blue Loctite
®
.
C Torqueto43in-lbs.(4.9NM).
10.15 Install air filters and cover.
A Install pre-filter
B Install clean air filter
C Install air filter flange and tighten
D Install air filter cover and tighten
 previous next