Filter
Top Products
9.
CHECKING FUNCTIONAL MEMBERS
9-1
CONTROL PANEL
Fig.
9-1
9-1
-1
AC RECEPTACLES
Using a “Dr. Robin”or a circuit tester, check continuity between the two terminals at the rear
of
the AC
receptacles while the receptacle is mounted
on
the control panel. When continuity is found between the
output terminals of the receptacle with a wire connected across these terminals, the AC receptacle
is
normal. When the wire
is
removed and
no
continuity is found between these terminals, the receptacles
are also normal.
Fig.
9-2A
-
Fig.
9-26
-
26
-