Filter
Top Products
ASSEMBLY
EK II 03/09 Assembly Section 4-4
©2009 Alamo Group Inc.
ASSEMBLY
TRACTOR PREPARATION
1. Add front end weights as required to maintain enough weight on front wheels for safe steering.
Failure to add the required front end weight can cause tractor to rear up which can
cause equipment damage and bodily injury.
To prevent damage to the Hydraulic Pump, do not attempt to start tractor before
installing the hydraulic systems and filling the system with Universal Tractor Hydraulic
oil as specified.
MAINFRAME ATTACHMENT
With a forklift or hoist raise the Mainframe until it lines-up with the 3-point hitch. Figure Asm-B-0001.
Attach the Mainframe to the 3-point hitch by using a standard Cat. II pin (Figure Asm-0003) or a optional
Cat. II & III pin (Figure Asm-B-0004-0005) and a Retaining Pin. Attach the tractor Top Link to the
Mainframe with bolt and locknut. Figure Asm-B-0006.