Filter
Top Products
OPERATION
EK II 03/09 Operation Section 3-40
©2009 Alamo Group Inc.
OPERATION
Streaking Conditions Conditions too wet for Allow grass to dry
cutting.before cutting. Slow
ground speed of
tractor but keep
engine running at full
PTO rpm. Cutting
lower may help.
Dull blades. Sharpen or replace
blades.
Height of cutter lower at See Cutting Height
rear or front. Instructions.
Blade Bolts Bolts not tightened. Tighten bolts to
350 ft.lbs.
Bolt hole elongated or Replace Bushing or
oversized. Blade Carrier.
Locknut worn out. Replace Locknut.
Blades Wears Too Fast Cutting in sandy conditions. Increase cutting height.
Cutting in rocky conditions. Increase cutting height.