Filter
Top Products
MAINTENANCE
EK II 03/09 Maintenance Section 4-7
©2009 Alamo Group Inc.
MAINTENANCE
Cylinder Rod Maintenance
It is important to visually inspect the hydraulic cylinder rods daily before use. It is highly recommended that
while the machine is stored or getting very little use that a protectant is applied to the hydraulic cylinder
rods to prevent degradation. If the machine receives more frequent use, be sure to fully cycle each cylinder
function so that the cylinder rod is coated by the systems hydraulic fluid. Depending on your operating
environment it may be necessary, under normal operating conditions, to apply a protective lubricant to the
cylinder rods for protection against rust and pitting. Hydraulic fluid may provide a suitable amount of
protection, but remember any protectant can attract dust and debris so attention must be given to the
cylinder rods daily. Also remember that any other protectant must be compatible with hydraulic fluid. Alamo
Industrial is not responsible for rust or pitting of the cylinder rod due to weather exposure or impacts from
normal operation or mounting. If hydraulic cylinders and or the cylinder rods are damaged as a result of the
rods rusting or pitting, the hydraulic cylinders and rods will not be covered under warranty by Alamo
Industrial.