Filter
Top Products
OPERATION
EK II 03/09 Operation Section 3-18
©2009 Alamo Group Inc.
OPERATION
Never Leave the mower unattended while the head is in the raised
position. The mower could fall causing serious injury to anyone who
might inadvertently be under the mower
. (SBM-4)
B
OO
M ARM A
SS
EMBLY
• Inspect condition of arm section weldment
• Ensure all pins are in place.
• Ensure all bolts and screws are properly
installed.
• Ensure each hydraulic cylinder is installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinders in place and are
secured properly. OPS-B- 0022_C
Never attempt to lubricate, adjust, or remove material from the Implement while it is in
motion or while tractor engine is running.
(SG-20)
HYDRAULI
C
LINE IN
S
PE
C
TI
O
N
• Check for hydraulic leaks along hoses,
cylinders and fittings. IMPORTANT: DO NOT
use your hands to check for oil leaks. Use a
piece of heavy paper or cardboard to check for
hydraulic oil leaks.
• Inspect the condition of the valve weldment.
• Ensure fitting is properly connected
• Inspect condition of hydraulic motor.
OPS-B- 0023_C