Filter
Top Products
MAINTENANCE
A96B 03/06 Maintenance Section 5-19
© 2006 Alamo Group Inc.
MAINTENANCE
Step 3. Unlock tab on special lock washer which locks top output shaft nut in place (Figure Mnt-R-0123).
Remove lock washer, gear, shims and spacer (Figure 23). Reinstall slotted spanner nut. Remove slotted
spanner nut from top end of output shaft.
Step 4. Remove the 4 M12 Cap Screws (#1) using a 17mm socket, then remove the Output Cap (#2) and
Gaskets (#3). Figure Mnt-R-0124.