Filter
Top Products
OPERATION
A96B 03/06 Operation Section 4-43
© 2006 Alamo Group Inc.
OPERATION
Tongue bending or binding Improper Drawbar. Add attaching Plate to all 3-Point
in turns. draw bars.
BREAKING BLADE BOLTS Operating with loose Blade Bolts. Tighten Blade Bolts to 300 ft./lbs
(Right Hand threads)
Worn Blade Bolt. Replace Bolt.
CUTTING TOO HIGH Blades bent up. Replace Blades.
Blade Carrier bent. Straighten or replace Blade Carrier.
Blades on upside down. Turn Blades right side up and tighten.
MOWER WINDROWING Cutting heavy material. Raise mower and reduce
ground speed.
BROKEN CROSS OR Load too high for joint. Use protective device with joint.
CUPS Check joint angles and phasing.
Slow down or raise Mower.
(See Clutch Maintenance)
END GALLING OF Speed too high during turns. Reduce PTO speed.
CROSS AND CUPS
NEEDLE ROLLERS Load too high for joint. Check for small joint angles.
HAVE BRINELLED Use protective device.
INTO CUP AND CROSS Check joint angles and phasing.