Filter
Top Products
MAINTENANCE
A96B 03/06 Maintenance Section 5-18
© 2006 Alamo Group Inc.
MAINTENANCE
Disassembly Instructions for Outer Gearbox
Note: Drain all oil from Gearbox before disassembly. Mount the Gearbox in a Vice to aid in disassembly and
assembly.
Step 1. Remove the eight M10 cap screws (#17) (using 14mm socket) from Input Cap (#19). Loosen the Input
Cap with a screwdriver and hammer. Then, lifting upward on the end of Input Shaft (#18), force the Input Cap
(#19) away from the Gearbox Housing, and remove complete Input Cap and Shaft assembly from the Housing.
Figure Mnt-R-0121.
Step 2. Remove the Input Cap (#19) off Input Shaft (#18), and
then press Input Gear (#20) and Bearing (#21) off the Shaft.
Press bearing from opposite end of input shaft. Figure Mnt-R-
0122.