Filter
Top Products
5
1.0 General
The Fibrlok
TM
2600 Series Multi-Fiber Optical Splicing System
provides permanent mechanical splices for single-mode or
multimode optical fibers with a nominal cladding diameter of 125
m.
The Fibrlok Multi-Fiber Optical Splicing System can be used with
either fiber optic ribbon cable or individual 250 m coated fibers
which have been organized into a ribbon structure (i.e.
"ribbonized"). For additional information concerning the use of
250 m fiber, refer to the Fibrlok
TM
2670 Multi-Fiber Ribbon
Construction Tool instruction bulletin.
1.01 Five color-coded splices are available to splice 4, 6, 8, 10 or 12
fibers:
Product Number Fiber Count Color Code
2604 4 Red
2606 6 Green
2608 8 Blue
2610 10 Gray
2612 12 Yellow
2.0 Preparation Kit
Fibrlok
TM
Multi-Fiber Optical Splice Preparation Kit
2.01 Preparation Kit Components:
Fibrlok Multi-Fiber Optical Splice Actuator Tool (A)
Fibrlok Multi-Fiber Magnifying Lens Assembly (B)
Multi-Fiber Pen Light Assembly (C)
Multi-Fiber Stripper Handle Assembly (D)
Multi-Fiber Stripper Wall Plug Transformer (E)
Multi-Fiber Stripper Tube Guides (F)
Fibrlok Fiber Viewer Assembly (G)
Fibrlok Multi-Fiber Cleaver Spacer Gauge (H)
Fibrlok Multi-Fiber Holder Assembly (I)
Lint Free Wiping Cloths (J)
Alcohol Bottle (K)
2.02 Additional Tools and Materials Required:
Alcoa-Fujikura Model CT-03, CT-04, CT-04B, or CT-07
Cleaver
Scotchcast
TM
4415 Service Wire Cleaning Kit
Cable Sheath Removal Tools
Reagent Grade Isopropyl Alcohol
Note: Sumitomo Model FC-4 Cleaver may be used
instead of the Alcoa-Fujikura Cleaver. The
2651-A Fiber Viewer must be used with this
cleaver .
(A)
(G)
(B)
(E)
(D)
(C)
(K)
(J)
(H)
(F)
(I)
Note: A compartment under the lint free wipes
is available for storing extra AAA
penlight