175
This function is used to set the
facsimile’s speaker ON in order
to monitor the phone line for
one communication only. This
function is mainly used to con-
firm dialing and phone line sta-
tus.
You can activate this option
when programming an Abbrevi-
ated Dial Number (page 65) or
One Touch Dial Key (page 71)
if communication with a certain
remote party always requires
this option.
Press:
+
+
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Turn ON the monitor speaker
by pressing:
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option
at this point.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92
Line Monitor
Load the Document
1
Display the LINE
MONITOR Menu
2
Select the Option
3
Enter the Facsimile
Number
4
JAN-31 09:43 AM 100%
AUTO RECEIVE
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
NOTE:
To change the default set-
ting of this function, refer to
page 57. The status selec-
tion in this operation will
take precedence over the
default setting.
MENU
Turn OFF the monitor speaker
by pressing:
1.ON
LINE MONITOR
2.OFF
