144
This function enables the at-
tachment of a cover sheet to
the document being transmit-
ted.
Prior to selecting this function
for the first time, you may wish
to prepare a Cover Sheet im-
age (Logo) to be used on the
cover sheet. See Step 4 of this
procedure.
Load the image document to be
included on the cover sheet.
NOTE:
In preparing a document for
your cover sheet image,
only a limited area of the
sheet will be included as
shown below. Any data out
of the specified range will
be disregarded.
Press:
+
+
+
+
Enable or Disable the Cover
Sheet attachment.
When the document is pulled
into the appropriate position,
the following screen is dis-
played.
Press:
Display the COVER
SHEET Menu
1
Enable / Disable the
Cover Sheet
2
Include an Image on
the Cover Sheet
3
Load the Image
Document
4
Cover Sheet Registration
Go to Step 4.
To omit an image on the cover
sheet, press:
LOAD DOCUMENT
PRESS [START]
MENU
When “OFF” is selected, the
“COMPLETED” message will
be displayed. The facsimile re-
turns to the Standby Mode.
(for OFF-Disable)
When “ON” is selected, the fol-
lowing screen is displayed.
(for ON-Enable)
To include an image (a
scanned company logo, etc.),
press:
(for YES)
When “NO” is selected, the
“COMPLETED” message will
be displayed. The facsimile re-
turns to the Standby Mode.
(for NO)
If Cover Sheet has already
been registered, the menu
screen for selecting "DELETE"
or "RETAIN" will be displayed.
5.9 in.
(
150mm
)
Feed
Direction
Effective
Range
When scanning is complete,
the facsimile returns to the
Standby Mode.
START
1.ON
COVER SHEET
2.OFF
2.NO
LOAD DOCUMENT
1.YES
