109
The Multi-Key Quick Broadcast
Transmission allows docu-
ments to be sent to a combina-
tion of the following numbers
without pre-programming a
group.
• One Touch Dial Keys
(See page 89)
• Abbreviated Dial Numbers
(See page 90)
• Alphabet Dialed Numbers
(See page 91)
• Keypad Dialed Numbers
(See page 92)
NOTE:
Up to 288 destinations can
be assigned in total using
the Keypad Dialed Num-
bers, One Touch Dial keys
and Alphabet Dialed Num-
bers. However, up to 100
destinations can be as-
signed using only the Key-
pad Dialed Numbers.
Enter the facsimile number of
the remote party using any of
the four dialing methods.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92
A screen like the one below is
displayed.
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Press:
MULTI
CHARGE CODE
Multi-Key Quick Broadcast Transmission
Load the Document
1
Press the MULTI
Key
2
NOTE:
If you select the same entry
twice, you are prompted to
delete or retain that second
entry.
Repeat this step until the fac-
simile numbers of all the de-
sired remote parties are en-
tered.
When the facsimile numbers of
all the desired remote parties
are entered, go to Step 5.
To cancel or retain a facsimile
number already programmed to
a Manual Group Dial, go to
Step 4.
Enter the Facsimile Number
3
JAN-31 09:43 AM 100%
AUTO RECEIVE
MULTI GROUP
ENTER TEL NUMBER
After 2 seconds:
ABB NBR= 154
INFORMATION BUREAU
ENTER MORE OR
PRESS [START]
