63
Clearing All Talk Group ID’s in One Bank
You can clear all talk group ID’s within a bank. This lets
you quickly delete all talk group ID’s from a bank if, for ex-
ample, you want to use the bank to store a different set of
talk group ID’s.
1. Press
PGM
.
2. Press
TRUNK
to enter a talk group ID memory mode.
3. Select a talk group ID bank using
FUNC
, or .
4. Press
FUNC
, then press
3
.
Confirm
list
clear
?1=YES
Press
other
key
for
NO.
appears on
the display.
5. Press
1
to clear the all talk group ID’s within a bank.
Note:
To cancel the deletion, press any key except
1
.
Please
wait
List
cleared
appears on the display
and the scanner returns to the talk group ID memory
mode.
OPEN AND CLOSED MODES
When set to the open mode, the scanner only uses the ID
list to look up ID text tags and stops on any ID code.
When set to the closed mode, the scanner stops only on
signals that have an ID code that is found in the ID list for
the bank.
Note:
When you select a channel manually, any trans-
mission opens squelch, regardless of the current mode.
Closed Mode
20-522.fm Page 63 Friday, September 17, 1999 12:46 PM
