62
Locking Out Talk Groups ID
Note:
You can only lock out talk group ID’s when the
scanner is in the closed mode (see “Open and Closed
Modes” on Page 63).
To lock out a talk group ID, follow these steps:
1. Press
PGM
.
2. Press
TRUNK
.
3. Press
FUNC
,
or to move the desired bank.
4. Press or to select the ID memory.
5. Press
L/OUT
to lock out the ID.
L
appears on the dis-
play.
6. To remove the lock out from trunking ID, manually
select the ID memory, and press
L/OUT
until
L
disap-
pears from the display.
Reviewing Locked-Out Talk Group ID’s
To review the talk group ID you locked out within a bank,
follow these steps:
1. Press
PGM
then press
TRUNK
.
2. Press
FUNC
then press
L/OUT
. The locked out ID
appears on the display. If the ID memory bank has
no locked out ID, you hear the low beep tone.
3. Press
FUNC
then press
or
to select a search
bank. Or, just press
or
to search for any
lockout ID’s in a bank.
Clearing Talk Group ID’s
1. Press
PGM
, then press
TRUNK
.
2. Press
FUNC
, or to select ID memory.
3. Press
FUNC
then press
CL
.
20-522.fm Page 62 Friday, September 17, 1999 12:46 PM
