49
Notes:
• You can still manually select locked-out channels.
• If you lock out a channel that is set to a trunking
mode, lockout is removed when you cycle power.
This lets you easily temporarily lockout trunking data
channels.
To remove the lockout from a channel, manually select
the channel and press
L/OUT
until
L
disappears from the
display.
Reviewing the Lock-Out Channels
To review the channels you locked out, press
MANUAL
.
Press
FUNC
then press
L/OUT
. You must press
FUNC
then
L/OUT
to view each lock-out channel.
Locking Out Frequencies
To lock out a frequency during a search, press
L/OUT
when the scanner stops on the frequency. The scanner
locks out the frequency, then continues searching.
Notes:
• The scanner does not store locked out frequencies
during a search.
• You can lock out as many as 50 frequencies in each
bank. If you try to lock out more,
Memory
full!
appears on the display.
• If you lock out all frequencies in one search bank and
only this search bank is activated,
Search up...
All
ranges
locked
out!
appears on the dis-
play and the scanner does not search.
20-522.fm Page 49 Friday, September 17, 1999 12:46 PM
