16 C4632M (11/09)
PTZ CONTROL
The PTZ control can be used to operate and configure cameras that have been configured for PTZ operation, including those that support Pelco P
and Pelco D protocols and third-party dome cameras.
Figure 4. PTZ Control
ZOOM: Zooms the camera in and out.
FOCUS: Performs two functions:
• In PTZ mode: Adjusts the camera focus.
• In camera menu: FOCUS+ and FOCUS- is used to navigating up and down the camera menu choices.
IRIS: Performs two functions:
• In PTZ mode: Opens and closes the camera iris.
• In camera menu: IRIS plus (+) selects an item. IRIS minus (-) exits an option setting. In the menu, the IRIS button
moves the cursor to EXIT.
Keypad: Use the keypad to enter presets or pattern numbers.
Program: Accesses the camera programming mode.
Clear: Deletes a programmed preset, pattern, or tour.
PRESET: Performs three functions:
• In preset programming mode: Stores the preset in the selected memory location.
• In PTZ mode: Activates a preset.
• Tour: Starts a a preset tour.
PATTERN: Performs two functions:
• Pattern programming mode: Stores the pattern in the selected memory location.
• PTZ mode: Activates a pattern.
Auxiliary: Unsupported at this time.
SET: Performs two functions:
• Enters PTZ programming mode.
• Exits PTZ programming mode.
