Basic Copy Operations
4
Di152f/Di183f 4-1
4 Basic Copy Operations
4.1 Loading the Document
The document can be loaded into the Automatic Document Feeder
(optional) or positioned on the Original Glass. Position the document
correctly according to the type of document being copied.
With the Automatic Document Feeder
To load the document
1
Adjust the Document Guide Plates
to fit the size of the document.
2
Load the document pages to be
copied face up into the Automatic
Document Feeder.
?
Have the necessary precautions
been observed when loading
the document?
➜ A maximum of 50 document
pages can be loaded.
➜ Do not load so many pages that the top of the stack is higher than
the mark.
➜ Be sure to adjust the Document Guide Plates so that they are
against the edges of the document, otherwise the document may
not be fed in straight.
➜ The paper sizes that can automatically be detected when loaded
into the Automatic Document Feeder are 11 × 17 L, 11 × 15 L,
Legal L, Letter L, Letter C, 5-1/2 × 8-1/2 L, A4 L and A4 C. If paper
of other sizes or non-standard sizes is loaded, the size cannot be
detected or it may be detected incorrectly.
