Utility Mode – Copy Functions
9
Di152f/Di183f 9-37
4
Using the 10-Key Pad, enter the
width of the area to be erased, and
then press the [Yes] key.
❍ The width of the area to be
erased can be set between 1/4
inch (5 mm) and 3/4 inch (20 mm).
❍ If you wish to correct the setting, press the [No] key, and then enter
the new number.
The “COPY SETTING 1” menu appears again.
To select the “COPY SETTING 2” menu
1
Press the [Utility] key.
2
Press the key 5 times to select
“COPY SETTING 2”.
3
From the 10-Key Pad, press the key ([1] through [5]) for the “COPY
SETTING 2” function that you wish to set.
❍ The “COPY SETTING 2” functions are as follows:
1 MIXED ORIGINAL
2 COPY PRIORITY
3 OUTPUT PRIORITY
4 4IN1 COPY ORDER
5 CRISSCROSS MODE
✎
Tip
If, at any time, you wish to quit setting a “COPY SETTING 2” function,
press the [No] key. When the message “STOP SETTING?” appears,
press the [Yes] key to quit.
