Fax Transmission/Reception Methods
7
Di152f/Di183f 7-27
Specifying F codes
When sending faxes
F codes can be specified when the 10-Key Pad is being used to enter the
fax number of a recipient while sending a fax.
1
Using the 10-Key Pad, enter the fax
number of the recipient.
2
Press the key, and then use the
10-Key Pad to enter the sub-
address.
❍ A number up to 20 digits long
can be entered for the sub-
address.
❍ To enter an SID, continue with step 3.
❍ If an SID will not be entered, continue with step 4.
3
Press the key, and then use the
10-Key Pad to enter the SID.
❍ A number up to 20 digits long
can be entered for the SID.
4
Press the [Start] key to begin scanning and sending the fax.
