A SERVICE OF

logo

Fax Transmission/Reception Methods
7
Di152f/Di183f 7-15
5
If necessary, change the “Resolution” setting (p. 6-8).
6
Specify the fax number of the
recipient.
Refer to “Dialing” on page 6-10.
7
Press the [Start] key to begin scanning and sending the fax.
Note
When transmission is finished, the transmission mode returns to the
default setting.
Memory transmission is the default transmission mode. To keep the
transmission mode set to direct transmission, set Utility mode function
“DEFAULT TX” to “ADF TX” (p. 10-38).