Basic Copy Operations
4
Di152f/Di183f 4-27
4.7 Interrupting Copy Jobs
Long continuous copy operations can quickly be paused by pressing the
[Interrupt] key in order to copy a different document.
✎
Note
Some functions cannot be interrupted. In addition, some functions are
not available while a copy job is interrupted. For details, refer to
“Function Combination Table” on page 14-11.
To interrupt a copy job
1
Press the [Interrupt] key. The
“Interrupt” indicator lights up and the
current copy operation is paused.
❍
When the [Interrupt] key is
pressed, all functions are reset
to their defaults.
2
Remove the current document, and
then load the other document that
you wish to copy.
3
If necessary, specify any other copy settings.
❍
Paper (p. 4-11)
❍
Zoom (p. 4-21)
❍
Copy density (p. 4-25)
