28 Touch Screen Display
MX5 User’s Guide E-EQ-MX5PCOGWW-G-ARC
Cleaning the Glass Display/Scanner Aperture
Keep fingers and rough or sharp objects away from the scan aperture and touch display. If the
glass becomes soiled or smudged, clean only with a standard household cleaner such as
Windex(R) without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-
based cleaning fluids since they may result in damage to the glass surface. Use a clean, damp, lint-
free cloth. Do not scrub optical surfaces. If possible, clean only those areas which are soiled.
Lint/particulates can be removed with clean, filtered canned air.
Programmable Buttons
Figure 20 Programmable Buttons (Tab / Scan / Enter)
The Scan buttons can be programmed by the System Administrator to perform the following
functions:
Disabled Key press has no effect.
Scan Pressing this key activates the laser scanner.
Enter Pressing this key confirms a forms entry or transmits information. See the
following section titled "Enter Key Function."
Tab Pressing this key moves the cursor to the next input field.
Field Exit IBM 5250/TN5250 units only. Pressing this key exits an input field. See the
following section titled "Field Exit Key Function."
How To: Program the Scan Buttons
Access: the Windows icon | Settings | System tab | Scanner | Key tab
Tap the desired radio button. Tap OK to close this menu option. Tap X to cancel changes. Any
changes made are in effect immediately.
