6 Quick Start
MX5 User’s Guide E-EQ-MX5PCOGWW-G-ARC
Quick Start
This section's instructions are based on the assumption that your new system is pre-configured and
requires only accessory installation (e.g. hand strap) and a power source.
Use this guide as you would any other source book -- reading portions to learn about the MX5,
and then referring to it when you need more information about a particular subject. This guide
takes you through an introduction to and operation of the LXE MX5.
In general, the sequence of events is:
In general, the sequence of events is:
1. Insert a fully charged battery.
(Always put a fully charged battery in the MX5 at the
beginning of the shift or workday.)
2. Connect an external power source to the unit (if required).
3. If the screen does not automatically display, tap the Power key.
4. Calibrate the touchscreen.
5. After all files are loaded and the Desktop is displayed, adjust audio volume and other
parameters if desired.
Important
If the mobile device has AppLock installed, please refer to “MX5 Reference Guide”,
“Chapter 4 – AppLock” for setup and processing information before continuing.
Troubleshooting
Can’t align the screen, change the
date/time or adjust the volume.
AppLock is installed and running on the mobile device.
AppLock restricts access to the control panels. Contact
your System Administrator.
Accessing Files on a CompactFlash Card
Tap the Windows icon | Programs | File Explorer | My Documents | My Device | Compact
Flash folder. The CompactFlash socket is located in a recess underneath the MX5’s main battery.
If you need to set up the integrated scanner (SE1223 or SE2223) barcode reading
parameters, please refer to the “Integrated Scanner Programming Guide” on the LXE
Manuals CD or the LXE website.
