12 Quick Start
MX5 User’s Guide E-EQ-MX5PCOGWW-G-ARC
Power Key
Note: Refer to the section titled "Power Modes" in the “MX5 Reference Guide” for information
relating to the power states of the MX5.
The Power key is located next to the <Z> key on the keypad. When a battery is inserted in the
MX5 for the first time press the Power key.
Tapping the Power key places the MX5 immediately in Suspend mode. Tapping the Power key
again, or connecting to AC power, immediately returns the MX5 from Suspend.
Figure 9 Power Key Location
Reboot Sequence
When the Pocket PC desktop is displayed or an application begins, the power up (or reboot)
sequence is complete. If you have previously saved your settings, they will be restored on reboot.
Application changes are saved when OK is clicked on an application applet.
Warm Reset
Hold down the Power key and the Orange key for 4+ seconds until the display blanks, then
release the keys. A warm reset does not affect the operating system and no data loss occurs.
Cold Reset
Hold down the Power key, the Blue key and the Orange keys for 4+ seconds.
The following steps will need to be performed when the MX5 powers on again:
1. Calibrate the touch screen.
2. Set the geographical Location.
3. Set the date and time.
Important:-- Because of the extreme nature of the Cold Reset, LXE recommends that the Cold
Reset be used only as an emergency procedure and the Warm Reset be used whenever
necessary.
LXE recommends the RegSave file be run when configuration changes are made.
Note: When performing a Cold Reset on a device, the system will ask if you want to overwrite
files –LXE recommends selecting “No” and continuing with the Cold Reset process.
