Quick Start 17
E-EQ-MX5PCOGWW-G-ARC MX5 User’s Guide
4. After slipping the strap through the bracket, fold the strap over so that the two closed loop
fastener surfaces mate evenly.
Figure 15 Strap Inserted in Upper Bracket
5. Prior to securing the upper bracket to the unit, slide the bottom assembly into the slots at the
bottom of the MX5. Insure that both ends of the bottom assembly are securely installed.
6. After securing the bottom of the strap to the MX5, loosen the closed loop fastener strap and
then secure the upper bracket to the unit with a screw.
Removal
1. Separate the closed loop fastener tabs and loosen the strap through the upper bracket.
2. Using a Phillips screwdriver, remove the upper bracket screw.
3. Pull the bottom assembly from the slots in the bottom back of the MX5..
Slide the bottom bracket out and away from the MX5 when replacing the Main Battery Pack.
Periodically check the handstrap for wear and the connection for tightness. If the handstrap gets
worn or damaged, it must be replaced.
