41
• Each time these buttons are pressed, the tone defeat mode
changes as follows:
On : Select this when listening to a program source without
the tone effect.
Off : Select this when adjusting tone for your taste.
Note:
• When the tone defeat mode is set to On, the tone (bass and
treble) cannot be adjusted.
Press the CURSOR UP()/DOWN() buttons to select the TONE CONTROL, then press the ENTER
button.
1
Press the CURSOR LEFT()/RIGHT() buttons to select the desired tone defeat mode.
2
When selecting the TONE CONTROL
When the tone defeat mode is set to Off to adjust the tone (bass and treble)
1. Press the CURSOR UP()/DOWN() buttons to select the desired tone mode.
• Each time these buttons are pressed, “” is moved to the tone defeat mode or the corresponding tone mode.
2. At the desired tone mode, press the CURSOR LEFT()/RIGHT() buttons to adjust the selected tone as desired.
• The tone level can be adjusted within the range of -10~+10 dB.
• In general, we recommend the bass and treble to be adjusted to 0 dB(flat level).
• Extreme settings at high volume may damage your speakers.
3. To complete tone adjustment, repeat the above steps 1 and 2.
Note:
• When the source direct function is activated, the TONE CONTROL cannot be selected.
