37
Repeat the above steps and until the speakers are all set to the desired mode.
4
Repeat the above steps and until the distances are all entered.
6
Press the CURSOR LEFT()/RIGHT() buttons to enter the distance from the selected speaker to the
listening position.
5
Press the CURSOR UP()/DOWN() buttons to select the SPEAKER DISTANCE, then press the
ENTER button.
1
When selecting the SPEAKER DISTANCE
Press the CURSOR UP()/DOWN() buttons to select the desired speaker.
4
• Then “” and “” are moved to the unit mode.
• Each time these buttons are pressed, “Meters” or “Feet” is
selected.
• Once a unit is selected, the distances are automatically
changed in the selected unit.
• Then “” and “” are moved to its distance.
• You cannot select the subwoofer, surround back speakers and the speakers set to “None”.
• You can set the distance within the range of 0.3~9 meters in 0.3 meter intervals(or 1~30 feet in 1 feet
intervals)
Press the CURSOR UP()/DOWN() buttons to select the unit.
2
Press the CURSOR LEFT()/RIGHT() buttons to select the desired unit.
3
