12
LOADING BATTERIES
OPERATING COMPONENTS WITH REMOTE CONTROL
1 2
• When a button is pressed, the corresponding
DEVICE button flickers.
• However, in case of DVD player, aim it at the
REMOTE SENSOR on the corresponding
component.
REMOTE CONTROL OPERATION RANGE
• Use the remote control within a range of about 7
meters (23 feet) and angles of up to 30 degrees
aiming at the remote sensor.
Remove the cover.
Load four batteries(“AAA” size, 1.5 V)
matching the polarity.
• When this remote control does not operate the component, the old batteries should be replaced.
• If the batteries are removed for a longer period of time, the remote control might lose its memory and require reentering.
Enter the setup code of the components
respectively, referring to “ENTERING A
SETUP CODE”(page14).
Turn on the components you want to
operate.
1
Press the DEVICE button on the remote
control corresponding to the component
you want to operate.
2
Press the button corresponding to the
operation you want while aiming the
remote control at the REMOTE SENSOR
on the component.
3
4
