40
Press the CURSOR LEFT()/RIGHT() buttons to select the desired DIGITAL IN.
4
• Each time these buttons are pressed, the DIGITAL INs change.
Notes:
• Because there are 5 DIGITAL INs on the rear and front panels,
one of CD, TAPE MONITOR and VIDEO 1~4 cannot be
matched a DIGITAL IN to.
In this case, you do select “None” instead of a DIGITAL IN.
• When the input source set to “None” is selected, the analog
input is automatically selected.
• In such a case that a DIGITAL IN is matched to two input
sources or more, when these input sources are selected, the
digital audio signals can be heard from the same DIGITAL IN.
• Each time these buttons are pressed, the video input
source changes.
When selecting the VIDEO SELECT
• You can also select a video input source on the OSD menu and enjoy it without pressing the VIDEO SELECTOR
button(s).
Repeat the above steps and until the connected DIGITAL INs are matched to the desired input
sources respectively.
5
Press the CURSOR UP()/DOWN() buttons to select the VIDEO SELECT, then press the ENTER
button.
2
Press the CURSOR LEFT()/RIGHT() buttons to select the desired video input source.
3
