33
ROOM 2 SOURCE PLAYBACK
• “R2” is flickering for 3 seconds and the ROOM 2
function is activated.
• To cancel the ROOM 2 function, press it again.
Then “R2” goes off.
• You can cancel the ROOM 2 function with using
these buttons even in the standby mode.
This function allows enjoying one source in the main room and playing another in a different room at the same time.
The analog signals from the 7.1 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial
or optical digital input cannot be output from the ROOM 2 OUTs, meaning no playback in a different room.
When you connect the multi - room adapter to the MULTI - ROOM jack of this unit, you can control this unit with its remote
control unit in a different room, too. (For details, refer to “CONNECTING MULTI - ROOM SYSTEM KIT” on page 7.)
Press the ROOM 2 button.
1
Select the desired input as a ROOM 2
source while “R2” is flickering.
2
• The selected ROOM 2 source is displayed for 3
seconds as follows : (R2) TUNER, (R2) CD, (R2)
AUX, (R2) VIDEO 1~4.
• Only these sources can be played in another room.
• When an audio program source is selected, as a
ROOM 2 source, the image of the video program
source selected previously can be played separately,
too.
(For details, refer to “SETTING THE ROOM 2
FEED SETUP”on page 46.)
• Only while “R2” is flickering, the volume level for
the ROOM 2 source can be adjusted.
• When “R2” is not flickering and lights up, press the
ROOM 2 button again briefly twice.
Start play on the component related to the
ROOM 2 source.
3
Notes:
• Even when this unit enters the standby mode, in such
a case that “R2” lights up still and the STANDBY
button lights up in blue as it does in the operating
mode, meaning only the ROOM 2 circuitry operates,
the ROOM 2 source selected previously can be played
independently.
• When you do not use the ROOM 2 function, cancel
the ROOM 2 function to save electricity.
• For ROOM 2 volume adjustment, refer to “SETTING
THE ROOM 2 FEED SETUP” on page 46.
