Chapter 6 Operation of Machine
BES-941BC • BES-1241BC
132
7-2 Inching Mode during Embroidering (Forcible Hoop Movement)
Note) • Moving the frame greatly in the inching mode may cause an interference with the machine.
Pay utmost care in the inching mode.
• Although the distance of the frame moved in the inching mode is stored even after turning OFF the
power, if the power is turned ON again and sewing is started, the pattern may be embroidered in a
different position. Be sure to use the inching mode appropriately.
1. Press the while pressing the
STOP
switch in order to select the inching mode.
2. Press the jog switch and the hoop moves
to the direction of the pressed switch.
Note) • Note that the forcible hoop movement will
produce deviation of embroidering by the
amount.
• If the hoop and material are deviated from
each other during embroidering, correct it
by using the jog switches.
3. Pressing the "END" switch
resets the inching mode.
4. Press the "START" switch
restarts embroidering.
END
