A SERVICE OF

logo

Open as PDF
next previous
BES-941BC • BES-1241BC
101
Chapter 5 Setting
Setting of thread breakage error resetting method
4. Select by pressing .
5. Press
for modifying a resetting method.
For setting whether to stop embroidering temporarily at the mending
stop point
4. Select by pressing .
5. Press
and select whether to stop embroidering temporarily.
Setting of thread trimming method after stopping
4. Select a thread trimming method by pressing .
Setting of mending stop position
4. Select a stop point (number of stitches before mending) by pressing ten
keys.
The machine does not stop if the automatic step-back setting is lower than the input value.
After setting all items, press
END
.
Modified setting is saved and the initial screen is displayed again.
Modify this figure.