A SERVICE OF

logo

Open as PDF
next previous
BES-941BC • BES-1241BC
108
Chapter 5 Setting
4. Select by pressing .
5. Modify setting by pressing .
Press
ESCESC
for invalidating the modification.
6. Press
END
.
Modified setting is saved and the previous screen is displayed again.
Checking the Embroidery Area
The embroidery area can be checked according to the following procedure.
The following two checking methods (rectangle and octagon) can be selected.
Item Contents
Checking by rectangle tracing
Checking by octagon tracing
1. Press twice.
2. Select
with .
3. Press .
4. Press
to select .
5. Press to change the settings.
Checking with the rectangle
Checking with the octagon
6. Press
END
.
The changed settings are stored and the previous screen is displayed.