A SERVICE OF

logo

Open as PDF
next previous
BES-941BC • BES-1241BC
117
Chapter 5 Setting
5. Press to validate or invalidate the lock stitch.
Validating the lock stitch
Invalidating the lock stitch
6. Press the
END
button.
The changed settings are stored and the previous screen is displayed.
Setting the lock stitch at the sewing start position after thread trimming
1. Press twice.
2. Select
with .
3. Press .
4. Select with .
5. Press to validate or invalidate the lock stitch.
Validating the lock stitch
Invalidating the lock stitch
6. Press the
END
button.
The changed settings are stored and the previous screen is displayed.