Zenoah G3200EZ Chainsaw User Manual


 
46
5. Spark arrester
The muffler is equipped with a spark arrester to
prevent red hot carbon from flying out of the exhaust
outlet. Periodically check and clean as necessary with
a wire brush after removing two muffler cover nuts and
one screw.
(1) Spark arrester
Never use a muffler if the spark arrester is missing or
defective.
6. Exhaust port
Remove the muffler, insert a screwdriver into the vent,
and wipe away any carbon buildup after every 100
hours of use. Wipe away any carbon buildup on the
muffler exhaust vent and the cylinder exhaust port at
the same time.
(1) Muffler exhaust vent
(2) Cylinder exhaust port
7. Sprocket
Check for cracks and for excessive wear interfering
with the chain drive. If the wear is considerable,
replace it with new one. Never fit a new chain on a
worn sprocket, or a worn chain on a new sprocket.
NOTE
10. Maintenance
English
F10-9
0.5mm
F10-10
F10-8