Filter
Top Products
Important Safety Information
v
WARNING: Fire hazard
The boosting feature is designed for short term operation only—
less than 4 seconds. Operating the boosting feature for more than 4
seconds may cause damage to the unit. Allow the XPower
Powerpack 200 Plus to cool down for at least 3 minutes after each
boost.
WARNING: Fire hazard
Do not leave the compressor unattended while operating. The
compressor is designed for short term operation only. Operation of
the compressor over an extended period of time will cause the
compressor unit to overheat and may cause damage. Allow the
compressor to cool down for 10 minutes after each 10 minutes of
continuous operation.
XPower_PP_200_Plus.book Page v Monday, October 23, 2006 2:57 PM