Filter
Top Products
Troubleshooting Reference
34
Troubleshooting Reference
WARNING: Electric shock hazard
Do not remove the cover of the XPower Powerpack or disassemble
the XPower Powerpack. The XPower Powerpack does not contain
any internal user-serviceable parts and attempting to service the unit
yourself could result in electrical shock or burn and will void your
warranty.
Table 5-1
Troubleshooting reference
Problem Possible Cause Solution
AC appliance
will not
operate;
audible alarm
is not
sounding.
AC appliance rated more
than 160 W, the safety
overload has tripped.
AC appliance is rated less
than 160 W, high starting
surge has tripped the
safety overload.
Use an AC appliance with a
power rating less than 160 W.
AC appliance may exceed the
XPower Powerpack’s surge
capability. Use an AC appliance
with a starting surge within the
XPower Powerpack surge rating.
Overload
shutdown
Appliance power
requirements exceed the
capability of the XPower
Powerpack.
Unplug the appliance and
confirm that the appliance’s
power requirement is 160 W or
less before attempting to restart
the appliance.
Alarm sounds XPower Powerpack
battery is nearly
discharged (11.0 V).
If you ignore this warning,
the XPower Powerpack
automatically switches off
when the battery reaches
10.5 V.
Turn OFF the AC Power On/Off
Switch and recharge the XPower
Powerpack.
XPower_PP_200_Plus.book Page 34 Monday, October 23, 2006 2:57 PM