Filter
Top Products
Parts 41
15148 (Rev. 2/9/2007)
L59 A-3 CASTER ASSEMBLY (OPTIONAL)
REF PART QTY DESCRIPTION
1 29750 1 Right & left caster bundle
2 12243 1 Caster yoke w/axle (includes bolt,
nuts & sleeve)
3 29746 (a) 1 Right caster arm assembly
(shown) 13-5/32" long -or-
3 6761 (a) 1 Right caster arm assembly,
16-5/32" long
4 29747 (a) 1 Left caster arm assembly,
13-5/32 long -or-
4 18424 (a) 1 Left caster arm assembly,
16-5/32" long
5 19703 1 8-1/2 Caster wheel with sleeve
7 ----- * 1 Straight 1/4 self-tap grease fitting
(for steel wheel) -or-
7 195 * 1 Straight 1/8 pipe thread grease fit-
ting (for polyethylene wheel)
8 21020 1 1/4 x 1-1/4 Spiral pin -or-
8 1285 * 1 1/4 x 1-1/2 Cotter pin
9 12296 * 1 1/4-28 Straight grease fitting,
15/32"
10 12169 * 2 3/8 NC x 1-1/4 HHCS GR5
11 838 * 2 3/8 Standard lock washer
12 835 * 2 3/8 NC Hex nut, plated
13 765 * 1 1/2 NC Hex lock nut
14 23479 1 1/2 NC x 5 HHCS GR5
15 29368 (c) 1 1/2 x 3/4 OD x 3-3/8 Sleeve -or-
15 12242 (c) 1 17 GA Wall x 5/8 OD x 3-3/8 tube
16 29375 (b) 2 3/4 Bore flanged bearing for 1-1/8
hole -or-
16 4228 (b) 2 5/8 Bore flanged bearing for 1-3/8
hole -or-
16 65578 (b) 2 3/4 Bore x 1.385 flanged wheel
bearing with groove
17 22240 2 3/4 x 1-3/16 x 10 GA Flat washer
18 4181 2 25/32 x 1 x 1/2 HT Sleeve
(a) For proper caster arm identifica-
tion, refer to dimension “L” as
shown on drawing. Caster arms
may be used on either side to
obtain best fit.
(b) Measure old bearing.
(c) Measure outside diameter of old
sleeve.
* Standard hardware, obtain locally
REF PART QTY DESCRIPTION